MWO 9-2320-279-20-3
(1) Apply silicone adhesive sealant (item 1,
(2) Place the slave box back on the fender. In-
Table 5) to
both sides of
insulator (2) and
stall the four mounting screws (5/1 6-
install NATO receptacle (1), insulator, and
18x5/8) and enlarge mounting holes, if re-
plastic gasket (3) in box (4).
move the slave box for installation of ca-
bles and NATO receptacle.
NOTE
d. Assembly of NATO Receptacle.
Install plastic gasket (3) so that
bosses on the gasket are next to
the four washers (7).
(2) Install four screws (#10-24X1) (5), one
through cap assembly lead (6), four wash-
ers (7), and four locknuts (8) in NATO re-
ceptacle (1).
NOTE
When installing receptacle, make
sure positive terminal (+) is on the
right side of the box (viewed with
the NATO receptacle facing you).
Positive terminal is identified by a
(+) sign.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-ven-
tilated area. If adhesive, solvent,
or sealing compound gets on skin
or clothing, wash immediately with
soap and water.
(3) Install two grommets (9) in box (4).
TABLE 5. Supplies
DESCRIPTION
NATIONAL STOCK NUMBER
ITEM
Adhesive-Sealant, Silicone RTV, General Purpose
1
Grease, Automotive and Artillery GAA
2
(MIL-G-10924)
Ties, Cable, Plastic
3
I
(MIL-S-29190)
7