Support Assembly (Pole)

TM 10-5410-223-14/1

d. Repair.

4-25. Support Assembly (Pole)

(1) Replace all worn and damaged parts.

a. Removal. Remove by pushing down on handle

(2) Replace an irreparable support assembly.

to disengage plug.

e. Assembly.

b. Disassembly.

(1) Install the plugs (5 and 6, fig. 4-27) in the

(1) Remove handle (1, fig. 4-27) and remove

tube (7) and secure with rivets (4).

the plug (2) and spring (3).

(2) Install spring (3) and plug (2) and secure

(2) Remove rivets (4) and remove the plugs (5

with handle (1).

and 6) from the tube (7).

f. Installaton. Position the support assembly

c. Inspection.

Inspect all parts for wear and

in deep can draw, push down on handle, release han-

damage.

dle when plug is in other deep can draw.

Figure 4-27. Support assembly, disassembly and reassembly.

4-82

Change 2