Section II. MOVEMENT TO A NEW WORK SITE

10-5410-223-14/ 1

2. WITH THE LIGHT ASSEMBLY ATTACHED, SECURE THE POWER CABLE TO THE

AIRLOCK ASSEMBLY USING THE REMAINING PATCH ASSEMBLIES. CONNECT

THE CABLE TO THE APPROPRIATE POWER SOURCE. `

TS 016744

Figure 4-6. Air lock light assembly, installation (sheet 2 of 2 ).

Section II. MOVEMENT TO A NEW WORK SITE

accomplished by crane hoist, hooked to the lifting

4-4. Dismantling for Movement

eyes on the multipurpose shelter, fork lift, wheeled

In general, the procedures for dismantling the

transporter dolly set, 5 ton cargo truck, or the

multipurpose shelter are the reverse of those used for

multipurpose shelter may be skidded for short

erection. All accessory equipment, furniture, or

distances. The 2-1/2 or 5 ton (2.26 or 4.54 mt)

other items installed in the shelter during use shall

military truck may be used for towing the shelter.

be removed and all external utility services shall be

See figure 4-7 for location and identification of

off or disconnected prior to dismantling shelter.

handling points and hardware. Perform the various

4-5. Handling

handling operations as follows:

Handling of the multipurpose shelter may be

4-33