Figure 4-3. Attaching and securing the air lock adapter (sheet 3 of 3 )

10-5410-223-14 /1

3. DRIVE BOW SPIKE INTO GROUND. PLACE THE BOW TUBE ENDS ONTO THE BOW

SPIKES. ATTACH GUY LINES TO THE AIR LOCK ASSEMBLY. PULL GUY LINES

TAUNT AND SECURE BY DRIVING GROUND ANCHORS INTO GROUND. COMPLETE

THE SECURING OF THE AIR LOCK ASSEMBLY BY PLACING TENT PINS THROUGH

THE ANCHOR ASSEMBLIES AND DRIVE INTO GROUND.

TS 016732

Figure 4-3. Attaching and securing the air lock adapter (sheet 3 of 3 ).

(3) Refer to figure 4-4 for instruction covering

pandable entrance way or as an interconnecting

the installation of the air lock assembly.

corridor with the multipurpose shelter. The following

instructions and illustrations in figure 4-4 concerns

NOTE

setting up with the expandable shelter in the event

The air lock assembly basically comes with the ex-

such a requirement should exist.

pandable shelter unit and may be used as an ex-

4-21