Table 2-1. Consumable Supplies

TM 10-5410-223-14/1

Table 2-1. Consumable Supplies.

(4)

(3)

(2)

(1)

National

Stock

Unit

Number

Description

Item

1357

8040-00-290-4301

Adhesive (contact cement)

Gal

6810-00-281-2002

Toluene

1 in, (2.5cm) W x 1¾ in.

8020-00-597-4762

Brushes

(4.4cm)

Paper Towels

7920-00-543-6492

(Kim Wipes)

Enamel, Semi gloss pale

Color No. 24554 or equal

green

TT-E-529

Color No. 34087

8010-00-297-0560

Enamel Flat,

TT-E-527

Olive drab

889351-61 (26533)

Paddle, mixing coated cloth

Type 1 class 1 MIL-C-43285

(OG 8 black)

7350-00-178-6784

Mixing cup

2640-00-264-6642

Talc lubricant

EC 7763MCO

Sealant

8040-00-042-8761

Epoxy

1 qt.

Bostik 1007P

8040-00-598-6164

Adheeive primer

(.95 liters)

Zipper ease

Section II. OPERATION UNDER UNUSUAL CONDITIONS

2-10. Operation in Snow and Ice

2-5. Operation in Extreme Cold

Procedures for operation in snow and ice areas as

a. Check fabric enclosure to ensure weather seal at

follows:

windows is closed.

a. Sweep snow from exterior of shelter with a soft

b. Close and secure door.

bristled brush or broom.

c. Install window panel inserts.

b. When ice build-up exists on exterior of shelter,

2-6. Operation in Extreme Heat

apply bleed air and/or hot air from a utility

No special operations required.

element heating unit.

2-7. Operation in Dusty or Sandy Areas

2-11. Operation in Mud

No special operations required.

When muddy conditions exist proper leveling may

become a factor. Continuous checks of levels and

2-8. Operation Under Rainy or Humid Conditions

adjustments to leveling jacks should be made as

Procedures for operation under rainy conditions as

required.

follows:

2-12. Operation at High Altitudes

a. Provide adequate drainage ditches to prevent

No special operations required.

standing water in area.

b. Check fabric enclosure to ensure weather seal

2-13. Operation in High Winds

at window is closed.

Procedures for operation during high wind con-

c. Close and secure door.

ditions are as follows:

d. Install window panel inserts.

a. Check fabric enclosure to ensure weather seal at

2-9. Operation in Salt Water Areas

windows are closed.

No special operations required.

b. Close and secure the door.

c. Install window panel inserts.

2-7