TM 10-5411-236-13&P
UNIT MAINTENANCE
AUTHORIZED STOCKAGE LIST MOBILITY SYSTEM (ASLMS)
MODEL NUMBER FPU-8/12 PARTS (OD) P/N 15005002-001
MODEL NUMBER FPU-8/12 PARTS (DS) P/N 15005002-002
MODEL NUMBER FPU-8/12 BULK (OD) P/N 15005001-001
MODEL NUMBER FPU-8/12 BULK (DS) P/N 15005001-002
CABLE D/C
INSPECT, REPLACE
INITIAL SETUP:
Material/Parts
References
Personnel Required
One
Equipment Condition
ASLMS set-up. Power Disconnected from
PDISE. Main Breaker set to OFF position.
Tools
INSPECT
Inspect cable for frayed or cut insulation and cable end damage. Report to direct support maintenance if
any problems are discovered.
REPLACE
1. Disconnect container from power source.
2. Turning counter clockwise, disconnect D/C lines from the FPU-12 (1).
3. Turning counter clockwise, disconnect D/C lines from the FPU-8 (2).
4. Install new 9-foot DC power cord (3) (DC power cord plugs are two pin and will only fit into DC
1
2
REAR FPU-12 9-FOOT DC CONNECTION
FRONT FPU-8 DC CONNECTION
0045 00-1