TM 10-5411-236-13&P
0033 00
6. Apply Locktite 262 red to the 5/16-inch diameter Allen head bolts.
7. Insert ten 5/16-inch diameter Allen head bolts and finger tighten.
8. Tighten all 5/16-inch Allen head bolts using a 3/16-inch hex head driver socket and 3/8-inch ratchet
with extension.
9. Reinstall rear pallet ledge horizontal stabilizer with the four Allen bolts using 3/16-inch hex head driver
socket and 3/8-inch ratchet with extension.
10. Reinstall front pallet ledge horizontal stabilizer with the four Allen bolts using 3/16-inch hex head
driver socket and 3/8-inch ratchet with extension.
11. Reinstall pallet ensuring the pallet cam lock is properly seated.
REPAIR
1. To repair the pallet ledge cam lock (1) the pallet ledge will have to be removed. To remove the pallet
ledge (2) to be repaired, follow steps 1 through 9 above.
2. Remove the 1/2-inch x 5/8-inch cam shoulder bolt and -inch lock nut using a -inch Allen wrench
3. Detach spring from pallet ledge.
4. Attach spring of the new cam lock assembly to the pallet ledge.
5. Attach new cam lock assembly to pallet ledge using the -inch Allen wrench and 9/16-inch socket
and ratchet.
6. Attach cam lock to pallet ledge using -inch Allen wrench and 9/16-inch socket and ratchet.
7. Reattach pallet ledge following steps 4 through 8 above.
1
2
END OF WORK PACKAGE
0033 00-3/(4 Blank)