TM 9-2350-256-34-2
CHAPTER 2
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS AND EQUIPMENT
2-1.
General
Tools, equipment, and maintenance parts, over and above those available to the using organization, are issued to direct
and general support maintenance personnel.
2-2.
Parts
Repair parts are listed in TM 9-2350-256-34P-2, which is the authority for requisitioning replacements. It is important
that careful troubleshooting be used to determine, whenever possible, what parts are to be replaced before the
component is torn down for repair.
2-3.
Common Tools and Equipment
Standard and commonly used tools and equipment having general application are authorized for issue by Tables of
Allowances and Tables of Organization and Equipment.
2-4.
Special Tools and Equipment
The special tools and equipment, listed in table 2-1 and illustrated in figure 2-1, are the only special tools and
equipment necessary to perform the maintenance operations described in this technical manual. Refer to TM 9-2350-
256-34P-2 for special tools and equipment allocations and requisitioning authority.
Table 2-1. Special Tools List
National
Reference
Nomenclature
Stock No.
Item,
Fig.
Para.
Use
Adapter
5120-00-767-9102
(10867497)
9,
2-1
3-6b
Used with puller 8708712 to remove
spade hydraulic cylinder pins.
Eye, main winch
(2 required)
4910-00-766-1962
(10884606)
10,
2-1
1-3b
Removing and installing main winch
Eye, hoist winch
(2 required)
4910-00-766-1963
(10884605)
11,
2-1
1-3c
Removing and installing hoist winch
Gage
6620-00-795-0330
(7950330)
12,
2-1
Used with bushing 4730-00-186-3024
to check power takeoff lubricating
oil pressure and power takeoff
clutch oil pressure. (See TM9-
2350-256-20).
Bushing, pipe
4730-00-186-3024
WW-P-471
Type II, Size
1/4-18 x 1/8-27
4,
2-1
Used with gage 7950330. (See TM
9-2350-256-20).
Gage
4910-00-766-3355
(10884612)
7,
2-1
2-6c
Checking main winch system
pressure, hoist winch system
pressure, spade system. pressure,
boom system pressure, or auxiliary
hydraulic system pressure. (See
table 2-3).
Guide, spade shaft
4910-00-767-0419
(10884600)
6,
2-1
3-6b
Used with handle 10867499 to install
the spade shaft through the oil
seal.
2-1