TM 9-2350-256-20-1
0106 00
2.
Remove two clamps (5) and rubber hose (6) from lower oil fill tube (1).
3.
Remove two self-locking nuts (7) and two screws (8) from clamps (9), and remove upper oil fill tube assembly (10).
4.
Remove ID plate (11) by removing two drivescrews (12) and two flat washers (13).
5.
Remove bracket (14) by removing two screws (15), two washers (16), and two self-locking nuts (17).
6.
Remove bracket (18) by removing two screws (19) and two lockwashers (20).
0106 00-2