Figure 4-11. Personnel Platform Replacement.

9-6115-652-14&P

Figure 4-11. Personnel Platform Replacement.

b. I n s t a l l a t i o n .

NOTE

If mounting brackets have not been removed, omit step (1).

(1)

Position each mounting bracket (5) on trailer frame (10). Insert three screws (7) through frame into each

bracket. Install one washer (8) and one self-locking nut (9) on each screw and tighten.

(2)

Holding platform (4) in vertical position, position platform on mounting brackets (5) so that holes in

platform line up with holes in brackets and install platform anchors (6) in upper mounting hole on each

side of platform.

Secure platform (4) to brackets (5) with two screws (1), four flat washers (2) and two self-locking

(3)

nuts (3).

4-23/(4-24

blank)