Repositioning shop equipment

TM 55-4920-438-13&P

b. Install cable (3) and retainer block (2) with screws

(1).

NOTE

When floor is lowered, (to allow roof clearance for folding) the devices securing fold-out floor

counterbalance cables can be disengaged.

When all equipment and materiel is stored on the stationary side of the shelter, the limited floor

space presents a safety hazard to operating personnel. This is most critical during the raising

and lowering of the roof panel. Failure to observe supplemental instructions could result in

serious injury to personnel. Personnel inside the shelter could become trapped between the roof

panel and equipment bolted to the floor.

2-30 Change 1