Setup of Power Train Shop upon initial receipt

TM 55-4920-438-13&P

2. As soon as there is enough floor area (4), the

personnel inside will move to the expanded side of the shelter

raising the roof with extended support struts (2).

3. Once the struts (2) are totally supporting

the roof panel (1), the end walls (5) are swung open.

The fold-out floor counterbalance cables must be secured in the cable housings prior to raising

the shelter floor from its lowered position to its level position. If the counterbalance cables are

not secured, the counterbalance cables will remain under tension. DO NOT attempt to remove

cables if the counterbalance cables are not secured. Removing cables while under tension

could cause serious injury to personnel.

4. (For shelter P/N 136-0000-101) Raise the upper lockout

plates (6) on each end wall and install upper lockout pins (7) into

the cable housings.

2-2 Change 1