WARNING - continued

TM 55-4920-438-13&P

Safety goggles will be worn when drilling and cleaning holes for insert replacement. Flying chips

can cause eye injury or even blindness.

Make sure compressed air supply is disconnected before attempting any work on the water/oil

separator. Do not direct compressed air near eyes or directly against skin. Wear goggles; high

pressure air against eye can cause blindness.

Extreme care must be taken when performing all types of welding operations. Serious health

and fire hazards exist. Harmful light rays can cause eye injury or even blindness. Protective

face masks and goggles must be used as well as other special clothing to reduce risks.

Poisonous fumes, burns, and electric shock, fire, and explosion hazards are some of the

additional possibilities of injury associated with welding operations. It is essential that all safe

practices be strictly observed.

Care must be taken to ensure that the proper bolts and washers are available to secure

equipment when shop is to be transported. Lack of correct hardware could cause extensive

damage to equipment or the shelter when the shop is moved.

Ensure that the power cable is not twisted, kinked or laid over sharp rocks or projections. Where

possible cable should not be routed through any deep ground depressions where water may

accumulate.