Figure 4-2. Hydraulic Fluid Level Check.

TM 5-1730-245-14

Figure 4-2. Hydraulic Fluid Level Check.

d. Filter removal . Refer to figure 4-3.

1) The hydraulic fluid filter (1) is a disposable spin-on cartridge type filter located inside the housing at

the front of the hydraulic fluid tank. To remove the filter, turn counter clockwise using a band type filter

wrench.

2) Dispose of in accordance with local SOP.

e. Filter installation. Refer to figure 4-3.

1) Apply a thin coat of oil to the rubber gasket on the new filter.

2) Turn the new filter (1) clockwise to the filter housing (2) until the rubber gasket just makes contact

with the housing sealing face.

3) Turn the filter (1) another 1/4 to 1/2 turn.

Figure 4-3. Hydraulic Oil Filter.

4-6