Chapter 8. SHIPMENT, LIMITED STORAGE, AND DEMOLITION TO PREVENT ENEMY USE

TM 11-6130-266-15

CHAPTER 8

SHIPMENT, LIMITED STORAGE, AND DEMOLITION

TO PREVENT ENEMY USE

a. Smash. Smash the cabinet, meters, and

controls. Use sledges, axes, hammers, crowbars, and

8-1. Packaging for Shipment

other heavy tool available. Remove the top panel, and

smash the internal components.

The exact procedure for packaging the equipment for

shipment and storage depends on materials available

b. Cut. Cut the wiring of the PP-6224/U. Use

and conditions under which the equipment is to be

axes, handaxes, or machetes.

shipped or stored. If the original packaging materials are

available, package the equipment as shown in figure

WARNING

2-1. If the original packaging materials are not available,

use sturdy cartons and barrier material to protect the

Be extremely careful with explosives

equipment.

and incendiary devices. Use these

items only when the need is urgent.

8-2. Authority for Demolition

c. Burn. Burn the technical manuals first. Burn as

Demolition of the equipment will be accomplished only

much of the equipment as is flammable; use gasoline,

upon order of the commander. The destruction

oil, flamethrowers, and similar materials. Pour gasoline

procedures given in paragraph 8-3 will be used to

on the cut cables and internal wiring and ignite them.

prevent further use of the equipment.

Use a flamethrower to burn the spare parts, or pour

gasoline on spares and ignite them. Use incendiary

8-3. Methods of Demolition

grenades to complete the destruction of the unit.

Use any of the methods of destruction given below. The

d. Dispose. Bury or scatter destroyed parts, or

time available for destruction is the major factor in

throw them into nearby waterways.

determining the method of destruction.

Figure 8-1. Color code marking for resistors and

capacitors.

(Located in back of manual.)

Figure 8-2. Power Supply PP-6624/U, block diagram

(Located in back of manual.)

Figure 8-3. Power Supply PP-6624/U, schematic diagram.

(Located in back of manual.)

8-1