Figure 5-2. Board Assembly A1, parts location.

TM 11-6130-266-15

TM 6130-266-15-9

Figure 5-2. Board Assembly A1, parts location.

determine whether faulty operation is due to one of

5-7.

Resistance of Transformers, Inductors, and

these parts. To do this, follows the troubleshooting

Relays

procedures (para 5-5d) and make the voltage checks

given in the voltage and resistance chart.

CAUTION

Make resistance measurements with

(2) Do not use the resistance measurements

input power off.

as the sole basis for discarding any of these parts as

a. The resistance values are provided as an aid to

defective. Because of broad winding tolerances during

troubleshooting. When using the data, observe the

manufacture, resistances of identical coils may vary from

following instructions:

the chart values, which are typical average values.

(1) Before making resistance measurements,

Change 3 5-5