Description

TM 11-6130-243-12

Power output:

(figs. 2-2 and 2-3) is installed behind the upper rear

Voltage . . . . .28.5 volts dc (at no load and

panel of the power supply so that either a 220- or

VOLTAGE ADJUST switch set to

440-volt ac input power maybe utilized. The power sup-

NOM).

ply includes one spare indicator lamp and one technical

Current , . . . .200 amperes (maximum).

manual. The spare indicator lamp is padded and taped

Ripple . . . . ..5 percent (maximum).

to the lower rear skid channel on the right side of the

Regulation . .9 percent.

power supply. The four-wire ac input cable consisting of

Weight . . . ..375 pounds.

a red, white, black, and green wire (green wire is for

1-6. Description

ground connection) is 100 feet long. The two-wire dc

output cable terminates in a molded and keyed female

Power Supply PP-4606/G is a two-wheel mobile unit in

connector and is 16 feet long. A dust and moisture seal

a metal cabinet, 46 ¾ inches high, 25 ½ inches wide, and

boot is provided for protection of the POWER ON

29½ inches deep. All operating controls arc mounted on

circuit breaker switch. The dust and moisture seal boot

the front panel. Louvers on the panels of the cabinet are

is of flexible plastic material that does not interfere with

provided for air circulation. A tap board with jumpers

positioning the POWER ON circuit breaker switch.

1-2

Change 2