Section Il. OPERATION

TM 11-6130-243-12-1

Figure 2-3. Connections on power tranformer terminals and circuit breakers for

440-volt ac input power for power Supply PP-4606A/G.

Section Il. OPERATION

2 - 4 . Controls and Indicators

(fig. 2-4)

b. Set the INPUT POWER circuit breaker

2-5. Operating Procedure

switch to ON and the equipment to be powered

to on.

After performing the input power con-

c. Check to see that the VOLTAGE meter

nection procedures given in paragraph 2-3, pro-

indicates between 26 and 30 volts.

ceed as described in a through d b e l o w .

d. Depress the PUSH TO INDICATE switch,

and check to see that the CURRENT mater indi-

a. Connect the dc output cable to the equip-

cates output current (200 amperes m a x i m u m ) .

ment to be powered.