Figure 2. Lubrication Instructions

TM 11-5820-921-40-2

NOTES

Lubrication of the Gears and Coil contact surfaces

is required only during overhaul of the respective

units and should not be performed at any other

time.

PROCEDURES

A. GEAR LUBRICATION

Apply a small amount of Lubriplate

grease, RF SPECIFICATION NO.

755017A8241 to the Lubrication

points specified in the illustration

to the left.

Remove any excess grease using a

lint-free cloth dampened with MEK

(Methylethylkeytone) MIL-M-81351.

B. COIL CONTACT SURFACE LUBRICATION

Mix one part Lubriplate grease, RF

SPECIFICATION NO. 755017A8241

and eight parts of Methylethylkeytone

(MEK) MIL-M-81351 in a suitable

container.

Using an appropriate device, spray the

mixture on all coil contact surfaces.

Remove any excess lubricant, using

a lint-free cloth dampened with

Methylethylkeytone (MEK) MIL-M-

81351.

TANK CIRCUIT MODULE ASSEMBLY 1A8

Figure 2. Lubrication Instructions