TECHNICAL CHARACTERISTICS

TM 11-5820-921-40-2

TECHNICAL CHARACTERISTICS

Six digital inputs from receiver/transmitter

FREQUENCY CONTROL

DIMENSIONS:

(TUNING)

8.0 inches (20.3 cm)

HEIGHT

16.4 inches (41.7 cm)

LENGTH

11.4 inches (28.9 cm)

WIDTH

WARMUP TIME

60 seconds ±10 seconds

54 lbs. (24.5 kg)

WEIGHT

Convection and forced air (fan on case exterior)

COOLING

2.0 to 29.9999 MHz in 0.1 kHz increments

FREQUENCY RANGE

High frequency power amplifier

TYPE OF AMPLIFIER

-40°C (-40°F) to +55°C (+13 1°F)

OPERATING TEMPERATURE

400 watt PEP or average

RF POWER OUTPUT

Up to 10,000 ft

OPERATIONAL ALTITUDE

Less than 100 milliwatts for rated output. (2 watts PEP maximum)

RF INPUT

IMMERSION OPERATION

3 feet in both fresh and salt water for 4 hours

Automatic - less than 6 seconds

TUNING

20 g's, 11 msec

SHOCK

Continuous transmit at 400 watts average power output

DUTY CYCLE

2.5 g's or 1.5 inch double amplitude, 5-55 Hz

VIBRATION

50 ohms with VSWR <1.3:1

INPUT AND OUTPUT

IMPEDANCE

+22 to +30 Vdc, +26.5 Vdc (nominal, 45 amps maximum)

PRIMARY POWER

REQUIREMENTS

USB, LSB, CW, SSB secure voice, SSB FSK

OPERATIONAL MODES

SPURIOUS SUPPRESSION :

Third order intermodulation products suppressed more than

INTERMODULATION

30 dB below either of two equal tones producing 400 watts

PRODUCTS

PEP ± 1 dB

35 dB below rated output

HARMONIC

ATTENUATION

60 dB below rated output

SPURIOUS RADIATION

40 dB below rated output

HUM AND NOISE