Touchup Painting

Installation--------------------------------

Check to see that equipment is corn-

plete.

Preservation-------------------------------

C h e c k all surfaces for evidence of fun-

Para 4-6.

g u s . Remove rust and corrosion and

s p o t - p a i n t bare spots.

P u b l i c a t i o n s - - - - - - - - - - - - - - - - - - - - - - - - - C h e c k to see that all publications are

DA Pam 310-4.

c o m p l e t e , serviceable and current

C h e c k DA Pam 310-7 to determine if

DA Pam 310-7.

Modidcations---------------------------

new applicable MWO'S have been

published. AU URGENT MWO'S

must be applied immediately. All

NORMAL MWO'S must be scheduled.

Connections and cables--------------------- C h e c k to be sure that connectors are

i n t a c t , clean, and tight-fitting, and

cable is in good condition, free from

cracks or deteriorated insulation.

Check cables for continuity.

ACON-OFF switch--------------------------- Check that mechanical operation of AC

O N - O F F switch is smooth and free

f r o m internal and external binding.

Check to see that no parts or hard-

Hardware-------------------------------------

ware, such as bolts, nuts, and screws

a r e missing.

C h e c k to see that fan and interior of

Fan--------------------------------------------

power supply is clean.

the bare metal to protect it from further corro-

4-5. Touchup Painting

sion. Refer to the applicable cleaning and re-

Remove rust and corrosion from metal sur-

finishing practices specified in TB SIG 364 and

faces by lightly sanding them with fine sand-

the painting supplies available for field use in

paper. Brush two thin coats of paint (Enamel,

SB 11-573.

Semigloss, olive Drab FSN 8010-844-8088) on

4-2