 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  (m) Destination marking omitted, in-
(g) Unsealed, punctured, or improperly
correct, or illegible.
sealed barrier bag, wrap, or envelope.
(n) Special marking or labeling (when
(h) Stock number omitted, incorrect,
required ) omitted, incorrect, or illegible.
or illegible.
(o) Oversea code marking (when re-
(i) Nomenclature omitted, incorrect, or
quired) omitted, incorrect, or illegible.
illegible.
(6) Packing and marking, minor.
(j) Marking of quantity of items in pack-
age omitted, incorrect, or illegible.
(a) Unsealed carton.
(k) Different stock numbered items in
(b) Defective taping or sealing of
the same unit package.
carton.
(c) Any other box defect which may be
(4) Packaging - and marking, minor.
considered minor b y definition of MIL-
STD-105D.
(a) Item not properly blocked or braced
within the unit package to prevent move-
(d) Any item of required marking infor-
ment.
mation other than (5)(j) through (o) above
listed under major defects omitted, incorrect,
(b) Packaging material damaged.
or illegible.
(c) Conforming or cushioning wraps are
f. Calibration of Measuring and Test Equip-
not snug fitting and contain voids.
ment. All measuring and test equipment shall
(d) Air not expelled from barrier prior
have been calibrated and certified within its
to sealing.
prescribed period, in accordance with TB
(e) Any item of marking information
750-236 before use. Certification shall be
other than (3)(h), (i), and j) above listed
affixed in such a way as to preclude any al-
under major defects omitted, incorrect, or
tering or tampering.
illegible.
g. Storage Inspection Records. Results of
inspections and tests shall be recorded on
(5) Packing and marking, major,
data sheets and a copy attached to each unit.
(a) Use of improper or defective ma-
terial.
7. Inspection Frequency. a. Controlled hu-
(b) Quantity in pack not as specified.
midity warehouse: 60 months.
(c) Gross weight in excess of specified
b. Heated warehouse: 36 months.
amount.
C. Unheated warehouse: 18 months.
(d) Box closure not as specified.
Controlled humidity
8. Type of Storage.
(e) Type, grade, class, and style of
warehouse or heated warehouse.
the shipping container not as specified.
9. Other Instructions. a. Rejected Lots.
(f) Strapping omitted (when required).
Each rejected lot shall be tagged and re-
(g) Strapping inadequate or incorrectly
classified into the proper condition code in
applied (when required).
accordance with AR 725-50. For other than
(h) I t e m s not adequately blocked,
new material, all defective units in a lot shall
braced, or cushioned within the shipping con-
be repaired, or disposition requested in accord-
ance with AMC and depot procedures.
tainer to prevent movement or damage.
b. Repackaging of Samples Inspected. Re-
(i) shipping documents or packing list
store the packaging of the samples inspected
omitted.
accepted to the level of the lot
and
j) Stock number omitted, incorrect, or
from which the samples were drawn.
illegible.
(k) Nomenclature omitted, incorrect, or
10. Special Requirements.
If the subject
illegible.
items are allocated for Foreign Military Sales,
Grant Aid, or Loan the following additional
(1) Marking of quantities of items in
requirements must be met:
pack omitted, incorrect, or illegible.
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals