|
| |
Back
Figure 4-2. Water Bottle Installation | Up
TM-5-3610-295-13P-2 Printing Plant Special Warfare Transportable - Press Shelter Manual | Next
Figure 4-3. Plunger Can Assembly |
TM 5-3610-295-13&P-2
4-13. PLUNGER CAN ASSEMBLY.
This task covers:
a. Inspect
b. Replace
INITIAL SETUP
Tools
General mechanics automotive tool kit
Materials
None
a.
Inspect.
(1)
Inspect plunger can for evidence of leaking.
(2)
Inspect mounting bracket for security of mounting.
b.
Replace. (See Figure 4-3.)
NOTE
Take care that no solvent is spilled.
(1)
Loosen worm drive screw (1) and remove plunger can (2) from support clamp strap (3). Take care that
any solvent in can is not spilled.
(2)
Remove screws (4), lockwashers (5), clamp strap (3), and mounting bracket (6).
(3)
Position mounting bracket (6) on wall so mounting holes align with mounting marks.
(4)
Secure mounting bracket (6) and clamp strap (3) to wall with lockwashers (5) and screws (4).
(5)
Position plunger can (2) on mounting bracket (6) and tighten worm drive screw (1).
4-22
|
