|
| |
Back
SECTION VI. UNIT MAINTENANCE PROCEDURES | Up
TM-5-3610-295-13P-2 Printing Plant Special Warfare Transportable - Press Shelter Manual | Next
Figure 4-2. Water Bottle Installation |
TM 5-3610-295-13&P-2
4-12. DUPLICATING MACHINE, MODIFICATIONS. - Continued
b.
Replace. (See Figure 4-2.)
NOTE
Duplicating machine has been modified. Water bottle has been installed
on bracket located on curbside wall of shelter.
(1)
Color Press. Refer to TM 5-3610-298-12&P for complete removal and replacement procedures.
(2)
Water Bottle.
(a)
Remove water bottle (1) from reservoir (2).
(b)
Disconnect reservoir hose (3) from duplicating machine (4).
(c)
Loosen reservoir mounting screw (5) and remove washer (6) and spring (7) and reservoir (2).
(d)
Remove bolts (8), lockwashers (9), flat washers (10), and mounting bracket (11) on curbside
shelter wall.
(e)
Install mounting bracket (11) on curbside shelter wall and secure with flat washers (10),
lockwashers (9), and bolts (8).
(f)
Install reservoir (2) on mounting bracket (11) and secure with spring (7), washer (6), and screw
(5).
(g)
Connect reservoir hose (3) to duplicating machine (4).
(h)
Install water bottle (1) on reservoir (2).
4-20
|
