|
| |
Back
Operator Troubleshooting -cont | Up
TM-5-3610-295-13P-2 Printing Plant Special Warfare Transportable - Press Shelter Manual | Next
SECTION III. OPERATOR MAINTENANCE PROCEDURES |
TM 5-3610-295-13&P-2
3-3. GENERAL. - Continued
Table 3-1. Operator Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7. DUPLICATING SHEETS STICKING TOGETHER.
Step 1. Check to see if the ink is drying too slowly.
Use proper ink for application.
Step 2. Check to see if the ink is too heavy.
Reduce ink feed-rate setting in accordance with TM 5-3610-298-12&P.
8. POOR SECOND COLOR COPY QUALITY.
Step 1. Check for incorrect color press ink flow or water flow.
Adjust ink flow or water flow in accordance with TM 5-3610-298-12&P.
Step 2. Check for incorrect plate to blanket pressure.
Adjust color press cylinder pressures in accordance with TM 5-3610-298-12&P.
9. PAPERCUTTER KNIFE STOPS IN PAPER STOCK.
Carefully check for burrs on knife cutting edge.
Refer to TM 5-3610-300-12&P for removal and sharpening procedures.
3-6
|
