Operator Troubleshooting -cont

TM 5-3610-295-13&P-2 3-3. GENERAL. - Continued Table 3-1. Operator Troubleshooting MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 3. DUPLICATING MACHINE DOES NOT START . Step 1. Check to see if the plug is out of wall receptacle. Plug into wall receptacle. Step 2. Check to see if a safety interlock switch is open. Be sure all interlocked covers and door are latched. Refer to TM 5-3610-298-12&P. Step 3. Check to see if a safeguard cover is out of place. Reposition all safeguard covers. Refer to TM 5-3610-298-12&P. 4. IMAGE ON MASTER WEARING OR BREAKING DOWN . Check to see if the form roller-to-master or master-to-blanket pressure is too heavy. Set pressure correctly in accordance with TM 5-3610-298-12&P. 5. DUPLICATION MATERIAL PASSING FROM DUPLICATING MACHINE AT TOO GREAT A RATE FOR RECEDING STACKER. Check that stacker paper truck lowering speed corresponds to the raising speed of the paper feeder magazine. Adjust paper truck lowering speed in accordance with TM 5-3610-298-12&P. 6. DUPLICATING MACHINE NOT PRODUCING GOOD COPY. Check for incorrect impression-to-blanket cylinders adjustment. Adjust cylinder pressure in accordance with TM 5-3610-298-12&P. 3-5