SECTION II. TROUBLESHOOTING PROCEDURES

TM 5-3610-295-13&P-2 SECTION II. TROUBLESHOOTING PROCEDURES 3-3. GENERAL. a. If you suspect a problem, you should first verify that the PRESTART PROCEDURE in paragraph 2-8 has been performed before continuing with OPERATOR TROUBLESHOOTING in table 3-1. b. The common malfunctions which you may encounter during operation or maintenance of the components of the press shelter are listed in table 3-1, OPERATOR TROUBLESHOOTING. You should perform the tests, inspections, and corrective actions in the order listed. c. This manual cannot list all malfunctions that may occur, nor all tests or inspections and corrective actions possible. If a malfunction is not listed or is not corrected by listed corrective actions in this manual, refer to the appropriate commercial or Technical Manual. If at this point you cannot correct the malfunction, notify your supervisor. d. Refer to table 3-1 for troubleshooting information and procedures applicable to the press shelter system and components. Any trouble the operating crew is not authorized to correct should be reported to the maintenance category indicated in the Maintenance Allocation Chart (MAC). WARNING DEATH or serious injury could result if electrical precautions are not taken when maintaining this equipment. Be sure that power cables are unplugged/disconnected, that circuit breakers are set to OFF, and that cables are unplugged/disconnected. Be sure the equipment is properly grounded. Always have another person standing by who is familiar with electrical shock first aid. 3-3