|
| |
Back
Figure 1-5. The Printing Process | Up
TM-5-3610-295-13P-2 Printing Plant Special Warfare Transportable - Press Shelter Manual | Next
1-15. ADDITIONAL REFERENCE MATERIAL |
TM 5-3610-295-13&P-2
1-14. TECHNICAL PRINCIPLES OF OPERATION. - Continued
(1)
DUPLICATOR INK SYSTEM. Contains the printing ink.
(2)
DUPLICATOR MOISTURE SYSTEM. Contains a fountain solution.
(3)
COLOR PRESS INK SYSTEM. Contains color printing ink.
(4)
COLOR PRESS MOISTURE SYSTEM. Contains a fountain solution.
(5)
PAPER PILE. Holds the paper sheets.
(6)
DUPLICATOR MASTER CYLINDER. Holds a metal or special paper master.
(7)
COLOR PRESS PLATE CYLINDER. Holds the color master.
(8)
DUPLICATOR MOISTURE FORM ROLLER. Contacts the duplicator master and applies moisture.
(9)
DUPLICATOR INK FORM ROLLERS. Contacts the duplicator master and applies ink.
(10)
COLOR PRESS INK FORM ROLLERS. Contacts the color press plate and applies color ink.
(11)
COLOR PRESS MOISTURE FORM ROLLER. Contacts the color press plate and applies moisture.
(12)
BLANKET CYLINDER. Contains a rubber blanket and when it contacts the master receives reversed
offset image.
(13)
VACUUM FEET. Feeds paper sheets from paper pile to pullout wheels.
(14)
PULLOUT WHEELS. Feeds paper sheet to register-board tapes.
(15)
REGISTER-BOARD TAPES. Carries paper sheets to feed rollers and
stop fingers for registration.
(16)
FEED ROLLERS. Feeds paper sheets to grippers on impression cylinder.
(17)
IMPRESSION CYLINDER. Presses paper sheets against blanket cylinder and the reverse image on
the blanket is impressed upon sheet and thereby reversed again to become a correct image.
(18)
RECEDING STACKER. Receives the printed sheets and provides mechanical jogging of the printed
material.
1-15
|
