|
| |
Back
SECTION II. EQUIPMENT DESCRIPTION AND DATA | Up
TM-5-3610-295-13P-2 Printing Plant Special Warfare Transportable - Press Shelter Manual | Next
Figure 1-2. Location and Description of Major Components, Press Shelter, Exterior |
TM 5-3610-295-13&P-2
1-11. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. - Continued
a. Press Shelter Exterior. Refer to Figure 1-2 for location of major components.
(1)
Condenser Cover. Protects the air conditioner when not in use and during transit of the shelter.
(2)
Air Conditioner. Provides temperature control for the shelter.
(J)
Water Tank Filler. Provides an outside means of filling water tank.
(4)
Sink Drain. Provides a means of draining sink.
(5)
Main Power Receptacle. Permits supply of power to interior main power service box when power
cable is connected.
(6)
Folding Steps. Allows access to roof of shelter.
(7)
Main Power Cable. Used to supply shelter with power from power source.
(8)
Air Filter Weather Cover. Provides access to the removable foam-type air filter.
(9)
Ladder Assembly. Provides a means of entry to shelter when truck mounted.
(10)
Blackout Warning Switch. Activates an interior blackout warning buzzer to warn personnel in the
shelter to turn off interior lights before opening door during blackout.
(11)
Telephone Binding Post. Used to facilitate connection of field telephone between units of printing
plant.
(12)
Level Indicators. Rear and side bubble gage-type levels used to level shelf.
1-6
|
