Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS)

TM 5-3610-295-13&P-1 2-13. INTRODUCTION. - Continued Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) WARNING SHUT OFF generator engine before performing any maintenance to prevent possible electrical shock. If the engine must be run, make sure the area is well ventilated. The exhaust fumes contain poisonous carbon monoxide gas which can cause death. NOTE If the equipment must be kept in continuous operation, check and service only those items that can be checked and serviced without disturbing operation. Make the complete checks and services when the equipment can be shut down. Table 2-1. Operator/Crew Preventive Maintenance Checks and Services (PMCS) B - Before D - During A - After Item Interval Item to be Inspected Equipment is Not Ready No. B D A Procedure /Available If: 1 • • Light Table Assembly. Check that both fluorescent tubes are illuminated. If necessary, refer to Unit Maintenance for service/repair. Fluorescent lights not operating. 2 • • PMT Processor Be sure that there are proper levels of chemicals. Check for correct and smooth operation. If necessary, service unit in accordance with commercial manual instructions. Unit does not operate. 3 . • • Vertical Camera Check for correct lens calibration. Check for correct operation of vacuum pumps and smooth operation of lens and copyboard system. Check for leaks in vacuum system. If necessary, service unit in accordance with TM 5-3610- 303-12&P. Leaks in vacuum system. 2-13