|
| |
Back
2-19. OPERATION IN DESERT CONDITIONS. | Up
TM-5-3610-294-13P Modular Printing System (MPS) Module C Press Section of the Army Special Warfare Modular Printing System Manual | Next
Figure 3-1. Air Conditioner Air Vent Door Hinges. |
TM 5-3610-294-13&P
CHAPTER 3. OPERATOR MAINTENANCE
SECTION I. LUBRICATION INSTRUCTIONS
3-1. GENERAL. Lubrication of equipment of the Finishing Section is mandatory and must be performed routinely to
keep equipment in operation. The following paragraphs describe operator lubrication instructions.
3-2. PAPER CUTTER. Refer to TM 5-3610-299-12&P, Paper Cutter Operation and Maintenance manual for lubrication
instructions.
3-3. AIR CONDIONERS (24,000 BTUH and 36,000 BTUH). Lubricate hinges (1) on all air vent doors using lubricant
(Appendix E, item 4). Refer to Figure 3-1. Wipe off excess lubricant. Refer to TM5-4120-395-14&P for detailed
lubrication instructions on the 24,000 BTUH Air Conditioner and to TM 5-4120-396-14&P for detailed lubrication
instructions on the 36,000 BTUH Air Conditioner.
3-4. FLIP-TOP PLATEMAKER. Refer to TM 5-3610-305-12&P.
Change 1
3-1
|
