|
| |
Back
Operator Preventive Maintenance Checks and Services (PMCS) (Continued) | Up
TM-5-3610-294-13P Modular Printing System (MPS) Module C Press Section of the Army Special Warfare Modular Printing System Manual | Next
Operator Preventive Maintenance Checks and Services (PMCS) (Continued) |
TM 5-3610-294-13&P
2-12. INTRODUCTION. -Continued
Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) (Continued)
B - Before
D - During
A - After
Interval
Item
Item To Be Inspected
Equipment Is Not Ready
No. B D A
Procedure
/Available If:
3. Check meters for proper operation.
Meters do not register.
4. Check indicator lamps for proper operation
Lamps do not light.
7
Thermostat
1. Inspect temperature set point lever for correct
Temperature set point
operation.
lever does not adjust temperature.
2. Check thermometer for
Thermometer indicator
proper operation.
does not register correct
temperature.
8
Air Conditioner (AC) Units(24,000 BTU/H and
36,000 BTU/H)
1. Check switches for proper operation.
Switches do not activate correct
settings.
2. Check levers for correct operation.
Levers do not allow for proper
setting.
3. Check thermostat for correct reading.
Thermostat does not register
correctly.
4. Check vent warning light for operation
Vent warning light does not
by closing one cargo vent.
activate when vents are closed.
5. Inspect filters for excessive dust or dirt.
Cooling or heating is impaired
and filters are dirty.
6. Spray filters with filter coater.
Filter not coated.
2-18
|
