|
| |
Back
Figure 2-1. Power Distribution Panel Controls and Indicators | Up
TM-5-3610-294-13P Modular Printing System (MPS) Module C Press Section of the Army Special Warfare Modular Printing System Manual | Next
Figure 2-3. Hygrometer and Temperature Indicator |
TM 5-3610-294-13&P
2-2.
EMERGENCY LIGHT. The emergency light is self-activating when input power to the shelter is lost. The test
switch allows the operator to check the condition of the batteries. Refer to Figure 2-2 for location of controls and
indicators.
a.
Ready Light (1) - Indicates power is ON.
b.
ON/OFF Power Switch (2) - In the ON position, connects battery to the circuit. In the OFF position, disconnects
battery from the circuit.
c.
Test Switch (3) - Switch for testing condition of the battery. When pushed, the bulbs in the emergency light will
light. Test switch works only when ON/OFF power switch is in the ON position.
d.
Charge Light (4) - Indicates when battery is charging. Charge light works only when ON/OFF power switch is in
the ON position.
Figure 2-2. Emergency Light
2-3
|
