|
| |
Back
Figure 2-9. Cargo Door AC Vent Assemblies | Up
TM-5-3610-293-13P Modular Printing System (MPS) Module B Press Section of the Army Special Warfare Modular Printing System Manual | Next
SINK ASSEMBLY. - Continued |
TM 5-3610-293-13&P
2-11. SINK ASSEMBLY. Refer to figure 2-10 for location of controls and indicators.
a.
Thermometer (1) - Indicates temperature of water in water tank.
b.
Water Level Indicator (2) - Indicates level of water in fresh water tank when water level switch (14) is in FRESH
WATER LEVEL position. Indicates level of water in gray water tank when water level switch (14) is in GRAY WATER
LEVEL position. Indicates empty when water level switch (14) is in OFF position. Indicates only when press to test
switch is pushed.
c.
Press to Test Switch (3) - Must be pressed to activate water level indicator (2).
d.
Adjust to Full Knob (4) - Provides for calibration of fresh water and gray water level probes. When fresh water
tank is full and water level switch (14) is in FRESH WATER LEVEL position, rotate adjust to full knob until water level
indicator (2) reads FULL. Press to test switch must be pushed for indicator to read full.
e.
Drain Fresh Water Indicator (5) - Indicates when fresh water tank has been selected for draining.
f.
Drain Gray Water Indicator (6) - Indicates when gray water tank has been selected for draining.
g.
Drain Pump Indicator (7) - Indicates when drain pump is operating.
h.
Fresh Water Tank Indicator (8) - Indicates when water level switch (14) is in FRESH WATER LEVEL position.
i.
Gray Water Tank Indicator (9) - Indicates when water level switch (14) is in GRAY WATER LEVEL position.
j.
Fresh Water Pump Indicator (10) - Indicates when fresh water pump is activated.
k.
Water Heater Switch (11) - Red lighted switch which turns water heater on or off. Switch is lighted when water
heater is on.
l.
Drain Pump Switch (12) - In the OFF position, turns drain pump off. In the ON position, turns drain pump on.
m.
Gray Water/Fresh Water Drain Switch (13) - In the OFF position, overrides drain pump switch (12) and does not
allow activation of drain pump. In the GRAY WATER DRAIN position, switches drain pump to gray water tank. In the
FRESH WATER DRAIN position, switches drain pump to fresh water tank.
2-12
|
