CHAPTER 1. INTRODUCTION

TM 5-3610-293-13&P CHAPTER 1. INTRODUCTION SECTION I. GENERAL INFORMATION 1-1. SCOPE. a. Type of Manual. Operating Instructions, Unit and Direct Support Maintenance. b. Model Number and Equipment Name. Model Number-None assigned. Modular Printing System (MPS), Module B, Press Section of the Army Special Warfare Modular Printing System, hereafter referred to as the Press Section. c. Purpose of Equipment. The Press Section contains a two-color printing press limited to 8,000 sheets per hour. The purpose of the Press Section is to print leaflets for distribution areas. The Press Section greatly expands the production capability of Army Psychological Operations (PSYOPS) units through use of its high-speed commercial printing press. Refer to Figure 1-1 for a layout of the Modular Printing System. d. Supplementing Manuals. The following manuals contain operating and maintenance instructions for other components of the MPS. (1) TM 5-3610-294-13&P Finishing Section (Module C) (2) TM 5-4120-395-14&P Air Conditioner Unit, 24,000 BTUH (3) TM 5-4120-396-14&P Air Conditioner Unit, 36,000 BTUH (4) TM 5-3610-295-13&P-1 Editorial and Photomechanical Shelter, Module A, Volume 1 (5) TM 5-3610-295-13&P-2 Press Shelter, Module A, Volume 2 1-2. MAINTENANCE FORMS AND RECORDS. Department of the Army forms and procedures used for equipment maintenance will be those prescribed by DA Pamphlet 738-750, The Army Maintenance Management System (TAMMS). 1-3. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR's). If your Press Section needs improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us what you don't like about your equipment. Let us know why you don't like the design or performance. Put it on an SF 368 (Quality Deficiency Report). Mail it to: Commander, U.S. Army Aviation and Troop Command, ATTN: AMSAT I-MDO, 4300 Goodfellow Boulevard, St. Louis, MO 63120-1798. We'll send you a reply. Change 2 1-1