 |
|||
|
|
|||
|
Page Title:
Table 3-1 . Organizational Preventive Maintenance Checks and Services Semiannual Schedule - continued |
|
||
| ||||||||||
|
|
  TM 11-7025-210-23
Table 3-1 . Organizational Preventive Maintenance Checks
and Services Semiannual Schedule -- Continued
Item
Item To Be
Equipment Will Be
No.
Inspected
Procedures
Reported Not Ready/
Available if
WARNING
Isopropyl alcohol is flammable.
Keep away from heat and open
flames.
7
Platen
Check condition of platen.
Clean, if necessary, with soft
clean cloth moistened with
isopropyl alcohol.
Lubricate platen bushing by
Platen bushing binds.
applying two drops of oil
to shaft on each end of
platen.
8
Print Mechanism
Lubricate linefeed idler
Gear bearing binds.
Linefeed Idler
gear by applying two drops
Gear
of oil between bearing and
shaft.
9
Print Mechanism
Check condition of three
Gears slip because of
Platen Drive
platen drive gears above
dirt, cracks, or
Gears
jackshaft on inside left
wear.
frame as follows:
1. Loosen three screws in
power supply cover.
2. Remove cover.
3. Remove two screws from
each side of cosmetic
shield.
4. Pull out cosmetic shield.
5. Using flat-tipped screw-
driver, press down
lightly on solenoid arm,
and hold.
3-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals