Table 3-1 . Organizational Preventive Maintenance Checks and Services Semiannual Schedule

TM 11-7025-210-23

Table 3-1 . Organizational Preventive Maintenance Checks

and Services Semiannual Schedule

Item

Item To Be

Equipment Will Be

No.

Inspected

Procedures

Reported Not Ready/

Available if

Print Mechanism

Check condition of motor drive

Belts or pulleys slip

Belts or Pulleys

pulley, left and right jack-

because of dirt,

shaft pulleys, and four left

cracks, or wear.

idler pulleys as follows:

1. Power off.

2. Pull ac plug from outlet.

3. Lift top cover

4. Remove paper.

5. Turn motor drive pulley

counterclockwise to check

belts and pulleys.

WARNING

Fumes of FREON-TF are poisonous;

provide thorough ventilation

when used. Do not use near

open flame or hot surface.

Do not get on skin.

6. Clean pulleys in place using

FREON-TF and clean cotton swab.

CAUTION

Use oil and grease sparingly to

prevent dirt collection. Do

not use alcohol or any other

cleaning agent on OILITE bear-

ings. These agents will damage

OILITE bearings.

Lubricate four idler pulleys

Pulleys hind.

by applying two drops of

oil on shaft next to bearing.

3-3