Film, Print Drier, and Space Heater Control Panel Repair

TM 11-6780-225-35

b. Cleaning and Inspection.

(3) Install switches (11) with nuts (12) and

retaining nuts (10).

(1) Inspect mechanical components for

(4) Assemble lamp sockets (9) with retaining

cracks, dents, and damaged screw threads.

washers (8), nuts (7), indicator lamps (6), and lamp

(2) Clean all components as requiring using

jewels (5).

cleaning compound and stiff bristle brush.

(5) Install panel (20) with screws (4A).

c. Assembly.

(6) Install connector (3) to box (4).

(1) Install rear plate (15) and rear spiral tube

(7) Install jack (2).

(14) with spacers (12) and (13).

(8) Connect

wiring

according

tag

(2) Install front spiral tube (10) and middle

references. Close panel (20) and install screws (1).

plate (11) with attaching parts (2) through (9).

(3) Install spiral tube connector (1).

NOTE

The reference designations of the

items in figure 3-10 are prefixed by

items in figure 3-9 are prefixed by

A16.

A17A2.

3-22. Refrigerator Repair (fig. 3-11)

3-21.

Film, Print Drier, and Space Heater Control

Panel Repair (fig. 3-10)

WARNING

Make certain all electrical power is

Make certain all electrical power has

removed.

been removed.

a. Disassembly.

(1) Remove refrigerator door (2) by removing

(1) Remove screws (1) and open panel (20).

hinge pin (1).

Tag and disconnect wiring as required.

(2) Remove control (4) with screws (3).

(2) Remove jack (2).

(3) Remove compressor and fan unit (8) from

(3) Remove connector (3) from box (4).

refrigerator box (9) with screws (7), nuts (5), and

Remove screws (4A).

washers (6).

(4) Remove lamp jewels (5), indicator lamps

b. Cleaning and Inspection.

(6), nuts (7), retaining washers (8), and lamp sockets (9).

(1) Inspect mechanical components for

(5) Remove retaining nuts (10), switches (11),

cracks, dents, and damaged screw threads.

and nuts (12).

(2) Inspect electrical components for apparent

(6) Remove retaining nut (13), switch (14),

insulation breakdown, loose connections, and possible

and nut (15).

shock hazards.

(7) Remove fuse retainers (16), fuses (17),

(3) Clean all components as required using

nuts (18), fuse holders (19), and panel (20).

cleaning compound and stiff bristle brush.

b. Cleaning and Inspection.

c. Assembly.

(1)

Inspect mechanical components for cracks,

(1) Install compressor and fan unit (8) to

dents, and damaged screw threads.

refrigerator box (9), with screws (7), nuts (5), and

(2) Inspect electrical components for apparent

washers (6).

insulation breakdown, loose connections, and possible

(2) Install control (4) with screws (3).

shock hazards.

(3) Install refrigerator door (2) with hinge pin

(3) Clean all components as required using

(1).

cleaning compound and stiff bristle brush.

c. Assembly.

NOTE

(1)

Assemble fuse holders (19) and nuts (18) to

The reference designations of the

panel (20). Install fuses (17) and fuse retainers (16).

items in figure 3-11 are prefixed by

(2) Install switch (14) with nut (15) and

A10.

retaining nut (13).

3-23.

Partition and Sliding Door Installation Repair

(fig. 5-11)

a. Disassembly of Aft Compartment.

(1) Remove aft roadside partition (81) and

3-21