Flash Unit Indicators

In A (Auto) position, the sensor

Auto/manual control

m e a s u r e s the amount of light

(or duration of flash) required

for the camera lens setting. In M

(Manual) , the lens must be set

for the calculator setting.

Plugged into a 120V/220V con-

AC/charge unit (fig.

l-l)

venience receptacle, the charge

unit provides direct current to

the batteries through a rectifier

circuit.

Charger voltage selector Provides a choice of either 120V or

220V to power the flash unit or

charge the batteries.

Shoe lock nut (fig. 2-4) Secures mounting shoe.

When PC cord is attached, flash

Hot shoe PC terminal

unit is fully synchronized to the

camera.

b. Flash Unit Indicators. The following list itemizes

the flash unit indicators observed by the operator and

d e s c r i b e s their function.

Function

Indicator

Indicates the flash unit is ready to

Ready light (fig. 2-3)

fire.

Determines proper lens setting for

Illuminated calculator

M a n u a l or proper Automatic

dial

f/stop selector setting. Pulsating

light indicates Battery Saving

Circuit is in operation.

Charge termination in- Indicates when batteries are fully

charged.

dicator

Sensor . . . . . . . . . . . . . Automatically senses the amount

of light or duration of the flash

required for the camera lens set -

ting.

2-7