 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  NOTE
Keep in mind that the guide number will
change with the extension or retraction
of the zoom/bounce head.
c. Bounce Flash.
(1) Set the mode selector dial to the M posi-
tion.
NOTE
When shooting in this mode, your
f/stop setting is dependent on the size
and color of the area and the total flash-
to-subject distance. The following op-
tions are available to you.
(2) In rooms of average size and color, it is
best to open your lens two f/stops wider than
you would normally use for direct shooting.
(3) Once you have set the ASA number on
the calculator dial, find the total flash-to-
reflector-to-subject distance on the dial.
(4) Note the f/stop indicated on the dial
above that distance.
(5) Open your lens one f/stop wider than
the indication on the dial.
(6) When your total bounce distance is more
than the maximum appearing on the calculator
dial, proceed as follows:
(a) Measure the distance from the flash
unit to the reflecting surface on the subject.
1-27
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals