 |
|||
|
|
|||
|
Page Title:
Operating Flash Unit, Model 285, on Camera in Automatic Mode |
|
||
| ||||||||||
|
|
  d. Slide the adapter, with the flash unit
attached, onto the camera.
e. Push the adapter as far toward the front of
the camera as you can. (The flash unit should be
perpendicular to the top of the camera as shown
in figure 2-3.1. )
f. If flash adapter is not used, connect the flash
unit PC cord to the shutter cord socket (fig. 2-4.1)
on the flash unit, and to the flash socket on the
camera (fig. 2-l).
NOTE
Flash, flash adapter, and camera all
have built-in hot shoe contacts and do
not require PC cord for normal on-
camera operation.
after paragraph 2-14.
on Camera in Automatic Mode
a. Direct Flash.
(1) Set the camera shutter speed dial at 60
and the camera meter switch at OFF-FLASH.
(2) Set the flash unit zoom/bounce head to
NORM position.
(3) Set the calculator dial, on the flash unit,
to the ASA rating of the film loaded in the
camera.
1-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals