Figure 5-1. Triggering circuit, exploded view.

TM 11-6720-248-12

Figure 5-2. Strobe assembly with battery

tray removed.

d. Carefully spread the front roller tabs to allow

g. Install replacement rear roller and bushings in

clearance for removing the front roller and bushings.

the notches of the roller assembly.

e. Remove the front roller and bushings.

h. Insert one end of the replacement front roller,

f. Remove the rear roller and bushings from the

with bushing, into a front roller tab of the roller assembly.

i. Position the other end of the replacement front

notches in the roller assembly.

roller, with bushing, against the other front roller tab of

the roller assembly.

j. While maintaining the front and rear rollers in a

parallel position, lift the front roller into position to allow

the front roller bushing to snap into place.

5-5