Appendix C. MAINTENANCE ALLOCATION

Appendix C is added after appendix B.

APPENDIX C

MAINTENANCE ALLOCATION

Section I. INTRODUCTION

C-1. General

This appendix provides a summary of the maintenance operations

covered in the equipment literature for Projectors, Still Picture

AP5 ( 1) and AP-5 (2). It authorizes categories of maintenance for

specific maintanance functions on repairable items and components

and the tools and equipment required to perform each function. This

appendix may be used as an aid in planning maintenance operations.

C-2. Explanation of Format for Maintenance Allocation Chart

a. Group Number. Not used.

b. Componentt Assembly Nomenclature. This Column lists the item

names of component units, assemblies, subassemblies, and modules on

which maintenance is authorized.

c. Maintenance Function. This column indicates the maintenance

category at which performance of the specific maintenance function

is authorized. Authorization to perform a function at any category

also includes authorization to perform that function at higher cate-

gories. The codes used represent the various maintenance categories as

follows :

Maintenance category

Code

C - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Operator/crew.

O - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Organizational maintenance

F - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Direct support maintenance.

General support maintenance.

H-------------------------------

Depot maintenance

D-------------------------------

d. Tools and Equipment. The numbers appearing in this column

refer to specific tools and equipment which are identified by these

numbers in section III.

e. Remarks. Self-explanatory.

C-3. Explanation of Format for Tool and Test Equipment

Requirements

The columns in the tool and test equipment requirements chart are

as follows:

a. Tools and Equipnwnt. The numbers in this column coincide with

the numbers used in the tools and equipment column of the MAC.

The numbers indicate the applicable tool for the maintenance function.