Federal Supply Codes

b. Federal Stock Number Column. This column indicates the Fed-

eral stock number for the item.

c. Description Column. This column includes the Federal item name

and any additional description of the item which may be required. A

part number or other reference number is followed by the applicable

five-digit Federal Supply Code for Manufacturers. When required to

indicate that the part is used on the models, so identified, the numbers

1 and/or 2 are placed under the heading Usable on Code. An explana-

tion of the codes used precedes the first item in section II of the basic

issue items list.

d. Unit of Measure Column. The unit used as a basis of measure

(e.g., ea, pr, ft, yd, etc.) is given in this column.

e. Quantity Incorporated in Unit Column. The total quantity of

the item used in the equipment is given in this column.

f. Quantity Furnished With Equipment Column. This column lists

the quantity of the item supplied for initial operation of the equipment

and/or the quantities authorized to be kept on hand by the operator

for maintenance of the equipment.

g. Illustrations Column

(1) Figure number (a). The number of the illustration on which

the item is shown is indicated in this column.

(2) Item No. or reference designation (b). Not wed.

B-3. Federal Supply Codes

This paragraph lists the Federal supply code with the associated

manufacturer's name.

code

Manufacturer's name

07055 -------------------------------- Charles Beseler Co.

07108 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - R. and J. Dick Co., Inc.

19139-------------------------------- Eastman Kodak Co.

81348--------------------------------

Federal Specifications.

81349 ---------- ------ ------ ------ ---- Military Specifications

96906--------------------------------

Military Standards.

TAGO 860B