Figure 4-11. Wall Cabinet, Removal and Installation

TM 10-3610-202-14 missing parts and security of installation. b. Removal If inspection indicates that replacement of the cabinet is necessary, remove the unit as follows: (1) Remove content retaining rods and shelf c. Installation Install replacement cabinet assembly as follows: (1) Position cabinet against left-hand shelter wall and align cabinet holes with mounting nutplate holes. (2) Support cabinet and install bolts, washers and nuts which attach the cabinet rear panel to the shelter wall. d. Repair. Repair of the wall cabinet assembly includes replacement of door handle, latch mechanism, door and hinge assemblies, and minor repair of shelf content retainers. (1) Door handle replacement. Replace door handle as follows: (a) Loosen locking screw which secures contents from cabinet. (2) Support the cabinet and remove the bolts, washers and nuts which attach the cabinet rear panel to the shelter wall mounting points. (See fig. 4-1.) Remove the cabinet. handle and center rod assembly to the latching mechanism inside right-hand door. (b) Withdraw handle and remove handle spacer. (c) Position spacer over replacement handle assembly center rod and insert rod through door and into latching mechanism. (d) With handle pointing down and with latch mechanism in locked position, tighten locking screw. (2) Latch mechanism replacement. Replace latch mechanism assembly as follows: (a) Loosen locking screw which secures handle and center rod assembly to the latching mechanism inside right-hand door. 4-29 Figure 4-11. Wall Cabinet, Removal and Installation