Storage Serviceability Standardization for USAECOM Materiel

SB 740-6730-91-001

DEPARTMENT OF THE ARMY SUPPLY BULLETIN

Storage Serviceability Standardization for USAECOM Materiel

PROJECTION SET, MOTION PICTURE

SOUND AS-2(1)

Section

I. INTRODUCTION

Paragraph

Page

Purpose

scope

Definitions

General

Reporting of supply bulletin improvements

II. STORAGE AND SPECIAL INSTRUCTIONS

Preservation, packaging, and packing

Marking

Storage

Disposition of refected materiel

Appendix

A. REFERENCES

B. FEDERAL STOCK NUMBERS AND TEST REQUIREMENTS

C. PRESERVATION, PACKAGING, AND PACKING

D. STORAGE, QUALITY ASSURANCE PROVISIONS

Section I

INTRODUCTION

level applicable to storage sampling inspection ex-

pressed in terms of percent defective or defects per

100 units, whichever is applicable, specified for a

given group of defects of a product. It is the max-

imum allowable accidental departure from specif-

ication requirements which can be tolerated.

It is the Army's objective to attain and maintain a

constant materiel readiness status for materiel in

depot stocks. The scope of such an objective is of such

magnitude that only general guidelines are provided

by chapter 3, section VIII of TM 743-200-l for the

quality evaluation of materiel in the custody of sup-

ply and storage activities. This standard supplements

TM 743-200-l by providing a systematic procedure

for storage cyclic inspection of projection set spec-

ified in paragraph 2 and indicates the limiting degree

of deterioration, damage, unsatisfactory storage

practices, and other characteristics which are ac-

ceptable. It also establishes the basis for identifying

materiel requiring segregation, remedial care and

preservation, or reclassification action. Applicable

requirements of the standard may be used for per-

forming receipt and preshipment quality control

inspections.