Click Here to
Order this information in Print

Click Here to
Order this information on CD-ROM

Click Here to
Download this information in PDF Format

 

Click here to make tpub.com your Home Page

Page Title: Figure 1-36.–Reflecting telephoto lens
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books

   
Back
Ultra-Wide-Angle   Lenses
Up
Photography (Basic) - Introduction to photography and other graphic techniques
Next
Figure 1-37.–Out-of-focus highlights caused by a mirror lens

Figure 1-36.–Reflecting telephoto lens. The overall physical length of a telephoto lens is usually only about one half of its focal length. A basic, long-focal-length lens must be placed one focal length away from the film if it is to form an image of a subject at infinity. In the case of a telephoto (or mirror) lens, the lens-to-film  distance  is  reduced  considerably  while  still retaining the effects of a long-focal-length lens. Thus a 1000mm telephoto lens rear element may only be 500mm away from the film when the lens is set at infinity. Those 35mm camera lenses that range from about 85mm to 135mm are good for shooting pictures of people. They allow you to shoot from about 6 feet away and still fill the frame with the subject’s face. Six feet from the subject is a good working distance. It is not too close for comfort, and it is not so far away that intimacy is lost. Telephoto  compression  is  the  apparent  compression of perspective. A telephoto lens does not compress perspective; it only appears that way! Remember, perspective does not depend on the lens being used, but on the position of the camera. So  then,  how  does  a  telephoto  lens  produce  the effect  of  compressed  perspective?  Several  factors  are involved: A telephoto lens is used from farther away to obtain the same size image that would be produced by a shorter lens at a closer distance. The more distant camera  position  produces  a  flatter  perspective.  But, because the long lens magnifies the subject, it still produces a normal size image. Thus the looks are flatter than  expected. The distance from which the print is viewed also has an effect. An X-times enlargement should be viewed from X-times the focal length of the lens used to make the picture in order for the perspective to appear natural. Therefore, a 6X enlargement of a negative shot with a 50mm lens should be viewed from 6X 50mm = 300mm or 12 inches, while a picture made with a 500mm telephoto lens and enlarged 12 times should be viewed from20feet(12 x 500mm=600 x 0.04 = 240 ¸ 12 = 20 feet). (Note: To convert millimeters to inches, multiply the known millimeters by 0.04.) A reflecting telephoto lens, the so-called mirror lens, has folded up optics. It uses internal mirrors to reflect the light twice. This enables the lens barrel to be much shorter, but because of the mirrors, it must also be much broader. As shown in figure 1-36, light that enters the lens through a glass plate is converged and reflected back by a concave mirror at the back of the lens. This reflected light is directed to a small backward-facing l-35

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing