Inspect auxiliary equipment as follows:

TM 9-1370-202-12

flares for local storage. Assure that weather cap has

moist desiccant bag, rusted swaging sleeves, key ring,

been taped in place before repacking.

etc. Replace weather cap on unserviceable flares and

repack for return to depot or ASP. Continue inspection

of serviceable flares.

b. Inspect auxiliary equipment as follows:

(3) With weather cap removed, inspect dial

(1) Check suspension bands for rust or

area for loose or missing thumbscrew. If loose, assure

damage which would preclude normal assembly of flare.

that setting dials are on SAFE and tighten thumbscrew.

If missing, replace with thumbscrew obtained from

(2) Check safety lanyards for moisture,

previous mission.

rusting of swaging sleeve and disconnect, torn plastic

bag, and damage which would preclude normal use.

(4) Inspect Mods 2A, 3 and 4 for presence of

(3) Check static lines for fraying, damage or

safety pin. If pin is missing, install safety pin obtained

other conditions which would render item unserviceable.

from previous mission.

(4) On completion of inspection, dispose of

(5) Inspect outer case for dents, cracks,

unserviceable auxiliary items locally.

corrosion and other damage or conditions which would

(5) Replace serviceable items in either

render flare unserviceable. Repack unserviceable flares

original or locally available containers and mark to

and return to depot or ASP.

indicate contents.

(6) On completion of inspection, repack

serviceable

4-2