Section III. REMOVAL OF FLARE DISPENSER XM19 FROM HELICOPTER

TM 9-1370-201-12

Figure 2-17. Launching flare by hand.

Section III. REMOVAL OF FLARE DISPENSER XM19 FROM HELICOPTER

2-7.

Removal of Dispenser

b. Detach cable from firing panel and nitrogen

cylinder.

WARNING

c. Unlock snap-screws holding firing panel to

Prior to attempting any removal procedures,

instrument panel. Remove firing panel.

assure that safety valve handle is in SAFE

d. Retract snout.

position, that bail is under handle of firing

e. Loosen locking nut and turn vibration snubber

device, and that safety switch is in SAFE

screw counterclockwise to fully extended position.

position with cover down.

f. Manually move interlock handle away from rail

to disengage interlocks from dispenser assembly.

a. Assure that safety valve handle is in SAFE

position, that bail is under handle of firing device, and

that safety switch is in SAFE position with cover down.

2-17