 |
|||
|
|
|||
|
Page Title:
Figure 3. Attaching Extractor Vent Bridle Lines. |
|
||
| ||||||||||
|
|
  TM 10-1670-327-23&P
0007 00
6. Tightly secure the ends of the cord (figure 3, item 2) over the apex extractor-attaching loop (figure 3,
item 1) using a surgeon's knot and a locking knot with a knot in the running end.
7. Trim excess to approximately 1 inch long.
8. Attach the remaining extractor vent bridle lines (figure 3, item 3) in the same manner.
3
2
2
3
1
1
1
Figure 3. Attaching Extractor Vent Bridle Lines.
Attach the Reserve Risers to the Reserve Canopy
1. Place the reserve canopy and all components on the packing table.
2. Layout reserve canopy on a pack table with the suspension line-organizing card at the bottom of the
pack table.
3. Extend the canopy to the opposite end of the pack table and temporarily secure the apex to the top of
the pack table by passing a packing loop (figure 4, item 1) through all of the vent loops (figure 4,
item 2). Attach the packing loop (figure 4, item 1) to the apex hook (figure 4, item 3).
0007 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals